AC 12V / 230V Pujol Receiver and Pujol Vario Code 433.92 MHz Rolling Code Garage Remote Control Handhold Transmitter

• Customization: Available
• Color: Green
• Connection: RF
• Model NO.: pujol receiver
• Function: Remote Control
• Material: ABS
• Certification: CE
• Model Number: Pujol Receiver and Remote Control
• Voltage: AC 230V DC 12V
• Code: Rolling Code
• Note: The Remote Control and Receiver Must Be Used Toget
• Frequency: 433.92MHz 433MHz
• Transport Package: Box/Bubble Bag
• Trademark: Scimagic-RC
• Origin: China
• HS Code: 85269200

Product Description

PUJOL JUNIOR AC 230 DC12V Volt Dual power control panel receiver + 433MHz PUJOL VARIOCODE transmitter. For blinds or Garage Door
Note: This link is for a pujol receiver panel and two pujol remote controls. If you need a separate pujol receiver panel or only one pujol remote control, please contact the seller

PUJOL JUNIOR MANOEUVRE CHART
PUJOL JUNIOR single-phase 230Vac control panel for roller shutters or doors that incorporates an open-source radio frequency
receiver compatible with PUJOL VARIOCODE transmitters with a frequency of 433 MHz.
* KIT contents: PUJOL JUNIOR control panel + 1 controls with cover with VARIOCODE code.
*KIT contents: PUJOL JUNIOR control panel + 2 controls with cover with VARIOCODE code

MAIN FEATURES PUJOL JUNIOR
Manoeuvring input protected by Zener diodes. Power and motor inlet protection - - by means of 6A fuse.
- Mains indicator LED.
- Reciprocating push-button input.
- Safety photocell input and anti-crush strip.
 

OPERATION OF THE PUJOL JUNIOR MANOEUVRING PANEL:

The automation manoeuvres are carried out by means of the reciprocating pushbutton or by means of a RollingCode 433.92 MHz transmitter. The manoeuvre is terminated when any of the following conditions are met: by the activation of the corresponding HR or by the end of the operating time.

The limit switches do NOT have a connection to the frame. The operating time is programmable up to a maximum of 2 minutes and 30 seconds and is a safety time. The automatic closing time is also programmable up to a maximum
of 3 minutes and regulates the waiting time before automatically executing the closing manoeuvre.
 

A RollingCode transmitter and the reciprocating pushbutton perform the same function. If the door is opening, when we press the
alternative emitter or button it stops, if we press again it closes, if we press stop again, if we press it opens again, and so
on.
 

It is 100% compatible with the following models:
PUJOL VARIO BLACK,
PUJOL VARIO MARS
PUJOL VARIO OCEAN

SELECTION OF OPTIONS PUJOL JUNIOR:

1. SE. TIMER/AUTO CLOSING

ON: Timed automatic closing.

OFF No automatic shut-off

2. PROGRAMMING TIMER

ON Operating Time Scheduling

OFF Time Scheduling Disabled

3. RADIO PROGRAMMING

ON radio programming of new broadcasters allowed

OFF radio programming disabled

4. PRESENT MAN

ON to close, press and hold the push button or the alternate button. If you don't hold down, the maneuver stops.

OFF normal operation.

Note: In normal operation, install a safety device to protect the closing edge.

5. SIDE ENTRY CONFIGURATION

ON Type 8k2 Verified Safety Side.

OFF Side not verified, NC contact.

PUJOL Control Highlight

1.Compatible with
PUJOL VARIO,
PUJOL VARIO MARS
PUJOL VARIO OCEAN,
2.5 seconds to Programming
3.Good control distance 10-100m open area
4.Quality assurance, if there is damage, contact customer service for compensation
5.24 hours delivery, can contact customer service for expedited delivery (except holidays)

Description:

1. Type of programming: Programming with the receiver
2. Number of channels: 3
3. Code: rolling code
4. Frequency: 433.92 MHz
5. Battery: Include

PUJOL Compatible Remote Manual

1. Open the case of your receiver
2. On the receiver card, press the programming button (ENR, MEMO, PROG, REC)
3. The LED of your receiver flashes
4. Press a button on your new remote control
5. Release the button. The LED of your receiver comes off immediately or within 10
seconds
6. Your new remote control is now programmed