Smg-E1003 IP55 Automated Gate Safe Infrared Detector Sensor/ Swing /Sliding/Garage Gate /Relay Door Safety Infrared Photocells

• Customization: Available
• Type: Photocell Infrared Sensor Detector
• Output Signal Type: 12 V to 24V DC/AC
• Model NO.: SMG-E1003
• Production Process: Infrared
• Feature: Garage Gate Door
• Certification: CE
• Customized: Customized
• high-Concerned Chemical: None
• Model Number: Infrared Detector
• Distance: 15 M
• Name: Infrared Photocells
• Technology: Infrared
• Infra-Red Frequency: 1.92kHz
• Receiving: ≤15m
• Wave Length: 940nm
• Input: Rx15mA-Tx30mA
• Operating Teaperature: -10ºC to+ 70ºC
• Relay Output: ["1A Max 36V","N.C./N.O."]
• Transport Package: Box or Bubble Bag
• Specification: 10 * 4 * 3.5
• Trademark: Scimagic-RC
• Origin: Mainland China
• HS Code: 85269200
• Package Size: 10.00cm * 10.00cm * 3.50cm
• Package Gross Weight: 1.500kg

Product Description

Product Description

12V to 24V DC/AC 15m safety beam Infrared Sensor Photo Eye Photocells infrared photocells door gate opener motor
Single beam photocell sensor/single beam detector is used for automatic slide door, coil door , garage door windows etc.

Consists of a transmitter and a receiver, and the integrated amplifier can produce infrared beam.

Narrow infrared beam (I or II) can avoid interruption by external light.

Even installed at low height(20-40cm from the floor), the detecting distance can also be guaranteed(5-10meters).

The beam produced by SCIMAGIC provides a self-detecting function for the sliding doors. Once the self-detecting beam is
interrupted, the door will stop closing and reverse rapidly to the utmost width. The door will open until the detecting beam is resumed. When the door completely closes, the detecting beam becomes invalid.

Technical Specification

Technology: Infrared
Receiving: ≤ 15m
Range: Range can be reduced to 30% in bad weather conditions:for,rain,dust,etc.
Infra-red frequency: 1.92KHz
Power supply: 12V to 24V DC/AC
Wave length: 940nm
Input: RX15 ma-TX 30 ma
Operating temperatuer: -10°C to +70°C
Relay contact loading capacity: 1A max 36V
Size:100*40*35mm
Installation:
The best Install height should big in 20 cm,Install distance to be no smaller than 2 meters.Install should make red outside the protection equip perpendicularity to place,and is on-line at same level.Install should Install first to recelve part,Install blast off part again.When together at always line.receive the OFF light in the machine In order to put out,then fix,connect the line to Install completion namely.

Attention:
Because this product shoot power compare big, so when shoot machine with receive the machine distance too near hour will appear have no the phenomenon of the reaction,at this time should draw back them one meter at least behind again try.When install dlstance very near,discover not intellgent phenomenon,can shoot and recelve medlum of the condensing lens remove,can Immedlately ralse an intelligent degree.

Rotation through 180°
Rotation through 180° llows the alignment of the photocells irespectiveof the way they are fixed to the base

 

Packaging & Shipping

1 pcs/ White Box, 30-50 pcs/bag 500/pcs per Carton

After Sales Service

Company Profile

Our factory ShenZhen Scimagic Development Technology Co. Ltd is a high-tech company that specializes in designing, manufacturing and selling Alarm system ,wireless RF receiver (remote controller), RF Remote control ( key fob and transmitter), RF module (wireless transmitter Module and Receiver Module), Remote Control Duplicator( face to face copying duplicator and machine copy duplicator). We have been manufacturing electronic product for 10 years . Our professional R&D staff can meet your different request . We hope to promote mutual benefit and build long term business with customers all over the world by joint efforts.

FAQ

Q1. Can I have a sample order?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, 1000 piece production time needs 1 weeks for order quantity more than.

Q3. Do you have any MOQ limit ?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order ?

A: Firstly let us know your requirements or application. Please confirm the frequency first: 315mhz 433mhz or 868mhz Then please confirm the chip: rolling code : HCS301, HCS300, HCS200 etc. Learning code: PT2240, EV1527 etc. Fixed code :SC2260 , SC2262, etc. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.

Q6. Is it OK to print my logo on Remote control and receiver product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer 1 years warranty to our products.

Q8: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%. Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.