| Customization: | Available |
|---|---|
| Color: | Grey |
| Connection: | RF |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Specifications:
1. Power supply: 12V-24V DC
2. Frequency: 433.92Mhz 433MHz
3. Codes: can work with any fixed/learning/rolling codes
4. 2 channel
5. Working temperature :-40ºC- + 80ºC
6.Built in Aerial antenna : Reception range 10-100m
Features
The product is a general smart receiver and it can be matched with the majority of the wireless receiver in the market, including fixed code (2262, 2260,2264,5326,M1E,M5E etc), learning code (1527, 2240, 6P20B, 6P20D etc). roling code (HCS301,HCS300,HCS200,HCS201,HSC100,HCS1O1 etc) and a part of customized remote controller.
Products advantage
1,Can learn Fixed and Rolling code 433,92Mhz remote controls separately and simultaneously !!!
2,2 channel receiver provides you with an option to control and use 2 gate automations or alarm systems simultaneously
3,The maximum number of remote controllers stored is 400, which is enough for the entire community to use.
4,It's very easy to connect it to your control board. All you need is to connect 4 wires between receiver and control panel. If you will need any technical support - i'm always at your service!
Momentary working mode
PROGRAMMING:
1.Learning transmitter's codes:
Press "learn 1" or "learn 2" for 1 second, the "learn_led" light, then, press the button which you choose on the transmitter till the "learn_led" flash and go out, the transmitter's code has been stored.
• Repeat the above steps for other transmitters.
2.Erasing transmitter's codes:
Press "learn 1" or "learn2" and hold on to make the "learn_led light till go out, all codes of transmitters which had been stored are erased.
){kind=link}