4 Buttons Garage Remote Control 100% Compatible with Novoferm Novotron 522 AES 128 Bit Code Gate Door Opener

• Customization: Available
• Certification: CE
• Button: 4 Buttons
• Model NO.: NOVOFERM Novotron 522 433.92MHZ Gate Remote C
• Key Words: Novoferm Remote Control
• Distance: 10-50m
• Transport Package: Box or Bubble Bag
• Specification: 7.4*3*0.8
• Trademark: Scimagic-RC
• Origin: Mainland China
• HS Code: 85269200

Product Description

Product Description

New NOVOFERM AES 128 BIT Code Garage Door Remote Control
Product Description
NOVOFERM Compatible Replacement Remote Control Rolling Code 433.92MHz.

Please check compatibility from the list below before purchase.

Make sure your original remote control is exactly the same brand and same model from our compatibility list. If it is not same,please don't buy. if unsure, please ask as first about compatibility.

Specifications
Model - NOVOFERM AES 128 BIT
Item condition - New
Third party remote control. Not made by NOVOFERM
Type of programming - Programming with the receiver
Decoder IC - Rolling Code.
Frequency - 433.92MHz.
Buttons - 2 
Operating voltage - CR2032 Include Battery

 

Compatible with:
NOVOFERM AES 128 BIT
NOVOFERM MCHS43-2
NOVOFERM MTR43-2
NOVOFERM MNHS433-02
NOVOFERM MNHS433-04
NOVOFERM NOVOTRON 502 MAX43-2
NOVOFERM NOVOTRON 504 MAX43-4
NOVOFERM NOVOTRON 512 MIX 43-2
NOVOFERM MINI-NOVOTRON 522
NOVOFERM MINI-NOVOTRON 524
NOVOFERM MINI-NOVOTRON 522 Design
NOVOFERM MINI-NOVOTRON 524 Design

Access to receiver required. Please make sure you got access to your receiver/opener before purchase.

Disclaimer: if your remote control is not on the compatibility list, it will not be cloned. We will not refund you. If there is a
problem with the remote control, please contact us first. We will resend or refund it for you.

Programming instruction
1. Open the casing of your receiver. It is located next to your motor.
2. On the receiver circuit board, press the programming button and let it go (ENR, MEMO, PROG, REC according to the model) The LED light on the receiver illuminates or blinks.
3. Press a button on your new remote control for 1 second.
4. Let the button go. The LED light on the receiver turns off immediately or in the following 10 seconds according to the model.Your new remote control is programmed.

What is Included
1 x Remote control
1 x Battery
1 x Keychain
1 x English instruction manual

Certifications