| Customization: | Available |
|---|---|
| Application: | Automatic Doors, Garage Doors |
| Certification: | CE |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DEA 4button Garage Remote Control 868MHz
(Note: This link is for a 4-button remote control. If you need a 2-button remote control, please contact the merchant!)
Description:
1.Number of channels: 4
2. Code:rolling code
3. Frequency: 868MHz
4.Woring Range: 10-50 m (open space)
5.Power supply: CR2032
6.Remote come with Battery !!!
Compatible receivers.
DEA252
DEA251
DEA25112
CXTRSKA
CXTRS2KA
CXSAT
CX920R
DEA GT12/868 remote control. This remote control has 2 blue buttons. The frequency of this remote control is 868.35 MHz and programming is by self-learning.
Special Tip:
It is not compatible with DEA 433.92MHz.
Please read the product description carefully, we are not responsible for your wrong purchase.
Programming
DEA GTI2/GTI4
When a button is pressed, the control-transmits the radio signal and tums on the LED thatindicates, in addition to the type of code used HCS rolling code-red LED(factory setting)
DIP sWITCH HT12-green LED;
D.A.R.T.DEA Advanced Rolling Transmission-alternating red/green LED .
Change transmission code
Hold down keys T1 and T2.When the radio control LEDS tum on(10s),wait until they flash to indicate the type of code set:
1 flash per second=HCS rolling code
2 flashes per second =DIP SWITCH HT12
3 flashes per second= D.A.R.T.
Hold down T1 and use T2 . to change the type of flash.Once the new code has beenselected, press and hold down key T2 until the LEDs tum off (5s) .
Programming with receiver
(Refer to the receiver manual for informationon the storage procedure.)
1.Open the gate opener and find the programming buttonbriefly, an LED will light up on the receiver P.C.B.,you nowhave 10 seconds to perform the next step.
What is Included
* Remote Control(Battery included)
* English Manual
){kind=link}