Garage Gate Door Receiver Relay Module AC 220V Wireless Remote Control Switch Transmitter for Motor Light

• Customization: Available
• Model Number: Smg-804
• Frequency: 433MHz
• Model NO.: smg-804
• Input Voltage: AC 220V
• Max Load: 2200W
• Remote Operating Mode: Momentary Toggle Latched
• Transport Package: Packing
• Specification: 50× 40× 30mm
• Trademark: Scimagic
• Origin: China

Product Description

Receiver
Working Voltage : AC 220V
Input vlotage : 1~220V
Output vlotage : 1~220V
Quiescent Current : <5MA
Max current : 10 A
Max load : 2200W
RF frequency : 433MHz
Working temperature : -30~+80
Receiving Sensitivity : >97dbm
Amount of storage remote controls : 25 pieces
Support encoding : 1527 Leaning code
RF Operating mode : ASK superheterodyne wireless reception
Receiving range : Open space is more than 30 meters
Remote operating mode : Momentary Mode /Toggle Mode /Latched Mode
Output Terminal : NO / COM / NC
Wide range of uses
Products can be used in homes, farms, factories, offices, laboratories, supermarkets and so on.You can remotely operate every
device connect with the relay receiver through the remote control. such as, garage door, electric door, shutter door, expansion
door and electric curtain, fan, Lamp, lighting, ventilation device, Signal transmission and so on.

 

The Setting of Working Mode:
1.Momentary Mode:
Pressing the learning key button on the receiver board once (LED Indicator on receiver board will signaling simultaneously), then
press any of the remote button, signaling three times by remote's LED indicator means setting Momentary Mode successfully.
2. Toggle Mode:
Pressing two times the learning key button on the receiver board twice(LED Indicator on receiver board will signaling
simultaneously),then press any of the remote button , signaling three times by remote's LED means setting Toggle Mode
successfully.
3.Latched Mode:
Pressing the learning key button on the receiver board three times (LED Indicator on receiver board will signaling
simultaneously), then press first remote button, follow on second remote button, signaling three times by remote's LED indicator
means setting Latching Mode successfully (first button stands for on, second button stands for off ).
This receiver contain 4 relays, and there are 3 terminals(normally open, common, normally closed) for each relay.This 4 relays are
independent, so that you can remote control each of them independently by pressing the remote button. Each receiver can store
about 25 transmitters. And One transmitter can control multiple receivers( the transmitter need to match with receiver ).For
example you can use two relays to control garege door/ motor and the other two to control Lights.