| Customization: | Available |
|---|---|
| high-Concerned Chemical: | None |
| Encoding Method: | Rolling Code |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
DEA GTI2 GTI4 Garage Remote Control 433.92MHz
It is compatible with all DEA 433MHz models.
When your remote control is lost, you can buy our remote control and pair it with your receiver, after the remote control is programmed successfully, you will get a new remote control
Description
* Model: DEA remote control.
* Frequency: 433.92MHz
* Code: Rolling code and Fixed code
* Buttons: 2/4 Buttons
* Material: ABS
* Battery: Including battery
* Control distance: 30m-100m (open space)
* Programming method: Programming with the receiver
Compatible With
DEA GTI2
DEA GTI4
DEA 433.92MHz Rolling Code
DEA GT2,GT4
DEA MIO TR2,TR4
DEA MIO TR2N,TR4N
DEA GENIE 273,GENIE 273L
DEA GOLD 288,GOLD 289
DEA 433.92MHz Fixed Code
DEA 433-1, 433-2, 433-4
DEA MIO TD2, MIO TD4
DEA punto-2, punto-4
DEA GT2M, GT4M
Access to receiver required. Please make sure you got access to your receiver/opener before purchase.
How is it programmed?
When a button is pressed, the control-transmits the radio signal and tums on the LED that
indicates, in addition to the type of code used.
HCS rolling code-red LED(factory setting)
DIP SWITCH HT12-green LED;
D.A.R.T.DEA Advanced Rolling Transmission-alternating red/green LED
Change transmission code
Hold down keys T1 and T2. When the radio control LEDS tum on(10s),wait until they
flash to indicate the type of code set:.
1 flash per second=HCS rolling code
2 flashes per second =DIP SWITCH HT12
3 flashes per second= D.A.R.T.
Hold down Ti and use T2 . to change the type of flash. Once the new code has been
selected, press and hold down key T2 until the LEDs tum off (5s)
Programming with receiver
(Refer to the receiver manual for information
on the storage procedure.)
1. Open the gate opener and find the programming button
briefly, an LED will light up on the receiver P.C.B., you now
have 10 seconds to perform the next step
Include
Remote Control
Include Battery
Keychain
English Manual
){kind=link}