ID Card Code Door Opener Encoding for Card Reader Access Control RFID System Door Lock Opener Wireless Touch Code Lock

• Customization: Available
• Suitable for: Home Door
• Customized: Non-Customized
• Model NO.: 2083
• Usage: Household, Garage Doors
• Name: C02 Touch Keyboard
• User Capacity: 1000
• Reading Distance: 1-5cm
• Voltage: 12V / 24V
• Door Opening Mode: Card or Password or Card+Password
• Current: <100mA
• Transport Package: Box/Bubble Bag
• Trademark: Scimagic-RC
• Origin: China
• HS Code: 85269200

Product Description

 

Main technical parameters of the product:

UWorking voltage: DC 12 V 24V

Unlock current: <1000 mA

Card read distance: 0-5 cm

Working temperature: 0 ~ 60ºC

Working humidity: 20% to 90%

Three Unlocking Methods

RFID Card or Password or RFID Card+Password

Product Features:
This machine is an access control all-in-one machine that uses non-contact
induction cards and passwords for access control. It is easy to use and reliable in
performance, and mainly has the following functions:
1. There are three types of door opening methods: card door opening, password
door opening, and card password door opening;
2. Two sets of signals are output independently, one set of relay dry contact
signals and one set of ground signal PUSH (low level);
3. A set of door opening button interfaces; A set of doorbell interfaces;
4. A set of WG26/WG34 interfaces that can serve as outputs for WG signals

3.2) Initialize programming password (123456)
The factory programming password is 123456. If you forget the programming
password Find the OPEN and GND short circuited together behind the
access control all-in-one machine, power it on again, and after 3 seconds,
turn off the power and release the OPEN and GND Re powering on will
restore the default programming password successfully

3.3) Use of Mother Card
Add User Card: In standby mode, swipe "Add Card", then swipe the user
card to be added, and then swipe "Add Card" to exit.
Delete User Card: In standby mode, swipe "Delete Card", then swipe the user
card to be deleted, and then swipe "Delete Card" to exit.
Delete all users: In standby mode, swipe "delete card", then swipe "add card",
and then swipe "delete card" to exit. This operation will delete all users,
including personal password users (excluding public passwords).

3.4) Instructions for copying data steps
Device A: User data has been saved; Device B: User data to be copied
Step 1: Power off the two devices first, and short circuit the "D0" of device A
to the "OPEN" of device B; Short circuit the "OPEN" of device A to
the "D0" of device B
Step 2: Power on the two devices, and device A enters the programming
# Programming Password # 8 66 #
Step 3: Two devices flash green lights, and a long beep indicates successful
copying