About Receiver:
Channel: 12 CH Radio Frequency: 433MHZ Operating Voltage: DC24V The way of output: A. 1-12CH Momentary-----Set jumper ON "A&L" B. 1-12CH Latched----- Set jumper ON 1 PIN (Don't used jumper) C. 1-12CH Toggle-- --Set jumper ON "B&L"
Momentary Press the Transmitter button 1, the receiver relay 1th is ON, release button 1; the receiver relay 1th is OFF, the same
as 2/3/4/5/6/7/8/9/10/11/12. 12CH are independent. Toggle Press transmitter button 1 for 1 time, the receiver relay 1th is ON,
press button 1 again, the receiver relay 1th is OFF, the same 2/3/4/5/6/7/8/9/10/11/12. 12CH are independent. Latched Press
transmitter button 1, the receiver relay 1th is ON, the relay 2/3/4/5/6/7/8/9/10/11/12 OFF. Press transmitter button 2, the
receiver relay 2th is ON, the relay 1/3/4/5/6/7/8/9/10/11/12 is OFF. Press transmitter button 3, the receiver relay 3th is ON, the
relay 1/2/4/5/6/7/8/9/10/11/12 is OFF Press transmitter button 4, the receiver relay 4th is ON, the relay 1/2/3/5/6/7/8/9/10/11/12
is OFF. ......…. It also mean .Latched only can keep 1CH ON .and it will often have 1CH is ON. Learning way and steps: Learning
Code: Input DC12V for the Receiver, Press the Learning Button on the Receiver ,LED Indicator ON ,Release it, then press the
Transmitter Button, Receiver LED Indicator flash for 3 time, it mean learning is successful. (Disconnect the power and connect
again for used normal ) Clearing Code: Input DC12V for the Receiver, press the learning button on the receiver and hold for about
8s until the Receiver LED indicator OFF, it mean the code have been cleared.
Audited Supplier 
){kind=link}